We often persist with the theory “Quality To start with, Prestige Supreme”. We are fully committed to delivering our clientele with competitively priced good quality items, prompt delivery and experienced support for Reasonable price Milling Bit Use Tungsten Carbide Solid Rod, For more information, please contact us as soon as possible!
We often persist with the theory “Quality To start with, Prestige Supreme”. We are fully committed to delivering our clientele with competitively priced good quality items, prompt delivery and experienced support for Carbide Solid Rod, Caribide Milling Rod, Tungsten Rod With Hole, We follow up the career and aspiration of our elder generation, and we have been eager to open up a new prospect in this field, We insist on “Integrity, Profession, Win-win Cooperation”, because we have a strong backup, that are excellent partners with advanced manufacturing lines, abundant technical strength, standard inspection system and good production capacity.
Chemical composition:
| Main and minor components | Min.content(%) | ASTM B760 |
| W | 99.95 | balance |
| Impurities | Max.values (μg/g) | Max.values (μg/g) |
| Al | 15 | - |
| Cu | 10 | - |
| Cr | 20 | - |
| Fe | 30 | 100 |
| K | 10 | - |
| Ni | 20 | 100 |
| Si | 20 | 100 |
| Mo | 100 | - |
| C | 30 | 100 |
| H | 5 | - |
| N | 5 | 100 |
| O | 20 | 100 |
| Cd | 5 | - |
| Hg | 1 | - |
| Pb | 5 | - |
Diameter and tolerances:
| Diameter (mm) | Tolerance | |||
| Straightened | Forged | Turned | Ground | |
| 0.50-0.99 | - | - | ±0.007 | |
| 1.00-1.99 | - | - | ±0.010 | |
| 2.00-2.99 | ±2.0 % | - | ±0.015 | |
| 3.00-15.9 | - | - | ±0.020 | |
| 16.0-24.9 | - | ±0.30 | ±0.030 | |
| 25.0-34.9 | - | ±0.40 | ±0.050 | |
| 35.0-39.9 | - | ±0.40 | ±0.30 | ±0.060 |
| 40.0-49.9 | - | ±0.40 | ±0.30 | ±0.20 |
| 50.0-90.0 | - | ±1.00 | ±0.40 | - |
Length and straightness:
| Diameter (mm) | Production length (mm) | Stiraightness/Meter (mm) | |
| Cleaned | Ground/turned | ||
| 0.50-10.0 | ≥500 | ＜2.5 | ＜2.5 |
| 10.1-50.0 | ≥300 | ＜2.0 | ＜1.5 |
| 50.1-90.0 | ≥100 | ＜2.0 | ＜1.5 |
Length tolerance:
| Diameter 0.50-30.0 mm | ||||||
| Nominal length (mm) | ≥15 | 15-120 | 120-400 | 400-1000 | 1000-2000 | ＞2000 |
| Length tolerance(mm) | ±0.2 | ±0.3 | ±0.5 | ±2.0 | ±3.0 | ±4.0 |
| Diameter ＞30.0 mm | ||||||
| Nominal length (mm) | ≥30 | 30-120 | 120-400 | 400-1000 | 1000-2000 | ＞2000 |
| Length tolerance(mm) | ±0.5 | ±0.8 | ±1.2 | ±4.0 | ±6.0 | ±8.0 |
Density: ≥19.1g/cm³
Nondestructive testing: For diameters＞15.00 mm:100% ultrasonic testing. For diameters of 0.50-50.0mm:Eddy curent tests on rods with ground surface.
| Diameter(mm) | Hardness (HV 10) |
| 0.50-2.99 | — |
| 3.00-9.99 | 420-500 |
| 10.0-29.9 | 420-480 |
| 30.0-49.9 | 380-460 |
| ≥50 | ＞350 |
Surface condition:
| Diameter (mm) | Surface condition |
| 0.50-90.0 | Chemical cleaned |
| ≥40.0 | Turned Ra ≤3.2μm |
| 0.50-30 | Centerless ground Ra≤1.0μm |
| ≥40.0 | - Centerless ground Ra≤1.2μm |