Sticking towards the theory of “Super Good quality, Satisfactory service” ,We are striving to become a superb business enterprise partner of you for Hot sale Pure Moly Rod, We sincerely hope to determine some satisfactory interactions along with you from the in the vicinity of long run. We’re going to hold you informed of our progress and anticipate building steady company relations along with you.
Sticking towards the theory of “Super Good quality, Satisfactory service” ,We are striving to become a superb business enterprise partner of you for Molybdenum Rod, With the spirit of “credit first, development through innovation, sincere cooperation and joint growth”, our company is striving to create a brilliant future with you, so as to become a most valuable platform for exporting our goods in China!
Molybdenum rods Chemical composition:
Main and minor components | Min.content(%) | ASTM B386 (361) |
Mo | 99.95 | balance |
Impurities | Max.values (μg/g) | Max.values (μg/g) |
Al | 10 | - |
Cu | 20 | - |
Cr | 20 | - |
Fe | 20 | 100 |
K | 20 | - |
Ni | 10 | 50 |
Si | 20 | 100 |
W | 300 | - |
C | 30 | 100 |
H | 10 | 20 |
N | 10 | 70 |
O | 40 | - |
Cd | 5 | - |
Hg | 1 | - |
Pb | 5 | - |
Dimensions and tolerances:
Diameter (mm) | Diameter tolerance (mm) |
Ground | |
0.50-0.99 | ±0.007 |
1.00-1.99 | ±0.010 |
1.00-2.99 | ±0.015 |
3.00-15.9 | ±0.020 |
16.0-24.9 | ±0.030 |
25.0-34.9 | ±0.050 |
35.0-3939 | ±0.060 |
≥40.0 | ±0.20 |
Cleaned | |
0.50-4.0 | ±2.0% |
4.10-10.0 | ±1.5% |
15.0-50.0 | ±0.30 |
51.0-75.0 | ±0.40 |
75.1-120.0 | ±1.00 |
121.0-165.0 | ±1.50 |
Turned | |
40.0-49.9 | ±0.30 |
50.0-165.0 | ±0.40 |
Length and straightness:
Diameter (mm) | Production length (mm) | Stiraightness/Meter (mm) | |
Cleaned | Ground/turned | ||
0.50-0.99 | >500 | <2.5 | <2.5 |
1.00-9.90 | >300 | <2.0 | <1.5 |
10.0-165.0 | >100 | <1.5 | <1.0 |
Length tolerance:
Diameter 0.50-30.0 mm | ||||||
Nominal length (mm) | 6-30 | 30-120 | 120-400 | 400-1000 | 1000-2000 | >2000 |
Length tolerance(mm) | ±0.2 | ±0.3 | ±0.5 | ±0.8 | ±1.2 | ±2.0 |
Diameter >30.0 mm | ||||||
Nominal length (mm) | 6-30 | 30-120 | 120-400 | 400-1000 | 1000-2000 | >2000 |
Length tolerance(mm) | ±1.0 | ±1.5 | ±2.5 | ±4.0 | ±6.0 | ±8.0 |
Density:
1. 00.50-40.0 mm ≥10.15g/cm³
2. 40.1-80.0 mm ≥10.10g/cm³
3. 80.1-120.0 mm ≥10.00g/cm³
4. 120.1-165.0 mm ≥9.90g/cm³
Nondestructive testing: For diameters>15.00 mm:100% ultrasonic testing; For diameters of 0.50-50.0mm:Eddy curent tests on rods with ground surface.
Diameter(mm) | Tensile strength(MPa) | 0.2% Yield Strength(MPa) | Elongation(%) | Hardness(HV 10) |
0.50-3.18 | ≥585 | ≥450 | ≥15 | |
3.18-10.30 | ≥515 | ≥380 | ≥15 | |
10.32-22.20 | ≥620 | ≥515 | ≥18 | 230-280 |
22.20-28.60 | ≥585 | ≥480 | ≥15 | 225-270 |
28.60-47.60 | ≥515 | ≥450 | ≥10 | 215-260 |
47.60-73.00 | ≥480 | ≥415 | ≥10 | 210-250 |
73.00-88.90 | ≥450 | ≥380 | ≥10 | 205-240 |
89.00-120.9 | ≥450 | ≥380 | ≥5 | 200-240 |
121.0-164.9 | ≥450 | ≥380 | ≥5 | 180-240 |
165.0 | ≥450 | ≥380 | ≥- | 180-240 |
Surface condition:
Surface: | Cleaned | Ground | Turned |
φ0.50-165mm | φ0.50-50.00mm | φ≥40.00mm | |
Roughness | Diameter (mm) | Ra (μm) Ground | Ra (μm) Turned |
≤2.50 | ≤0.80 | - | |
2.5-50.0 | ≤1.00 | - | |
≥40.0 | - | ≤3.2 |