Our staff are generally while in the spirit of “continuous improvement and excellence”, and while using the excellent high quality merchandise, favorable value and great after-sales services, we try to gain each customer’s have faith in for Rapid Delivery for Tzm Molybdenum Foil/plate Mo1 99.95% Purity, sincerity and strength ,often preserve approved superior quanlity ,welcome to our factoty for stop by and instruction and company.
Our staff are generally while in the spirit of “continuous improvement and excellence”, and while using the excellent high quality merchandise, favorable value and great after-sales services, we try to gain each customer’s have faith in for Tzm Molybdenum Foil Sheet, Tzm Molybdenum Foil Sheet Radiation Sheilding, Due to our good goods and services, we’ve got received good reputation and credibility from local and international customers. If you want more information and are interested in any of our solutions, remember to feel free to contact us. We look forward to becoming your supplier in the near future.
Chemical composition:
| Main and minor components | Min.content(%) | ASTM B386 (361) |
| Mo | Balance | balance |
| Ti | 0.40-0.55% | 0.40-0.55% |
| Zr | 0.06-0.12% | 0.06-0.12% |
| Impurities | Max.values (μg/g) | Max.values (μg/g) |
| Al | 10 | - |
| Cu | 20 | - |
| Cr | 20 | - |
| Fe | 20 | 100 |
| K | 20 | - |
| Ni | 10 | 50 |
| Si | 20 | 100 |
| W | 300 | - |
| C | 100-400 | 100-400- |
| H | 10 | - |
| N | 10 | 20 |
| O | 500 | 300 |
| Cd | 5 | - |
| Hg | 1 | - |
| Pb | 5 | - |
Dimensions and tolerances:
| Cold rolled sheets | |||
| Thickness(mm) | Thickness tolerace(±mm) | Maximal width(mm) | Width tolerace(±mm) |
| 0.30-0.50 | 0.028 | 300 | 1.0 |
| Hot rolled sheets | |||
| Thickness(mm) | Thickness tolerace(±mm) | Maximal width(mm) | Width tolerace(±mm) |
| 0.50-0.60 | 0.06 | 850 | 1.6 |
| 0.60-1.00 | 0.08 | 850 | 1.6 |
| 1.00-1.50 | 0.13 | 850 | 2.0 |
| 1.50-2.00 | 0.15 | 850 | 2.0 |
| 2.00-3.60 | 0.18 | 850 | 2.0 |
| 3.60-50.0 | 5% | 1000 | 2.0 |
Length tolerance:
The length tolerance for all dimension is maximal +5/-0 mm.
Flatness: max. 4 % (measuring procedure on the basis of ASTM B 386)
Density: ≥ 10.1 g/cm³
Vickers Hardness: 220-320 HV
Tensile Test:
| Thickness (mm) | Tensile StrengthMin. (MPa) | 0.2% Yield strengtMin.(MPa) | ElongationMin.(%) |
| 0.30-1.00 | 700 | 600 | 5 |
| 1.00-2.50 | 700 | 600 | 10 |
| 2.50-5.00 | 700 | 600 | 12 |
| 5.00-20.00 | 650 | 600 | 10 |
| 20.00-50.00 | 550 | 470 | 5 |
Appearance: The material will be of uniform quality, free from foreign mater, splits and fractures. Bed sheet (not trimmed) may have small edge cracks.
Surface defedts are assessed in the frame of visual inspection.
Surface condition: pickled.