Our well-equipped facilities and great good quality regulate throughout all stages of manufacturing enables us to guarantee total buyer gratification for China Wholesale Tungsten Carbide Rods With Double Helical Holes 30(r),Cemented Carbide Rod With Two Helix Holes, We’ve been happy that we’ve been steadily expanding using the energetic and long lasting guidance of our glad shoppers!
Our well-equipped facilities and great good quality regulate throughout all stages of manufacturing enables us to guarantee total buyer gratification for Cemented Carbide Rod, Threaded Rod With Hole, Yl10.2 Tungsten Carbide Welding Rod, Besides there are also specialist production and management , advanced production equipment to assure our quality and delivery time , our company pursues the principle of good faith, high-quality and high-efficiency. We guarantee that our company will try our best to reduce customer purchase cost, shorten the period of purchase, stable products quality, increase customers’ satisfaction and achieve win-win situation .
Chemical composition:
Main and minor components | Min.content(%) | ASTM B760 |
W | 99.95 | balance |
Impurities | Max.values (μg/g) | Max.values (μg/g) |
Al | 15 | - |
Cu | 10 | - |
Cr | 20 | - |
Fe | 30 | 100 |
K | 10 | - |
Ni | 20 | 100 |
Si | 20 | 100 |
Mo | 100 | - |
C | 30 | 100 |
H | 5 | - |
N | 5 | 100 |
O | 20 | 100 |
Cd | 5 | - |
Hg | 1 | - |
Pb | 5 | - |
Diameter and tolerances:
Diameter (mm) | Tolerance | |||
Straightened | Forged | Turned | Ground | |
0.50-0.99 | - | - | ±0.007 | |
1.00-1.99 | - | - | ±0.010 | |
2.00-2.99 | ±2.0 % | - | ±0.015 | |
3.00-15.9 | - | - | ±0.020 | |
16.0-24.9 | - | ±0.30 | ±0.030 | |
25.0-34.9 | - | ±0.40 | ±0.050 | |
35.0-39.9 | - | ±0.40 | ±0.30 | ±0.060 |
40.0-49.9 | - | ±0.40 | ±0.30 | ±0.20 |
50.0-90.0 | - | ±1.00 | ±0.40 | - |
Length and straightness:
Diameter (mm) | Production length (mm) | Stiraightness/Meter (mm) | |
Cleaned | Ground/turned | ||
0.50-10.0 | ≥500 | <2.5 | <2.5 |
10.1-50.0 | ≥300 | <2.0 | <1.5 |
50.1-90.0 | ≥100 | <2.0 | <1.5 |
Length tolerance:
Diameter 0.50-30.0 mm | ||||||
Nominal length (mm) | ≥15 | 15-120 | 120-400 | 400-1000 | 1000-2000 | >2000 |
Length tolerance(mm) | ±0.2 | ±0.3 | ±0.5 | ±2.0 | ±3.0 | ±4.0 |
Diameter >30.0 mm | ||||||
Nominal length (mm) | ≥30 | 30-120 | 120-400 | 400-1000 | 1000-2000 | >2000 |
Length tolerance(mm) | ±0.5 | ±0.8 | ±1.2 | ±4.0 | ±6.0 | ±8.0 |
Density: ≥19.1g/cm³
Nondestructive testing: For diameters>15.00 mm:100% ultrasonic testing. For diameters of 0.50-50.0mm:Eddy curent tests on rods with ground surface.
Diameter(mm) | Hardness (HV 10) |
0.50-2.99 | — |
3.00-9.99 | 420-500 |
10.0-29.9 | 420-480 |
30.0-49.9 | 380-460 |
≥50 | >350 |
Surface condition:
Diameter (mm) | Surface condition |
0.50-90.0 | Chemical cleaned |
≥40.0 | Turned Ra ≤3.2μm |
0.50-30 | Centerless ground Ra≤1.0μm |
≥40.0 | - Centerless ground Ra≤1.2μm |