We always think and practice corresponding to the change of circumstance, and grow up. We aim at the achievement of a richer mind and body and the living for Factory For Hot Sale 99.95% Molybdenum /tzm /mola Alloy Sheet /plate /target, Welcoming fascinated organizations to cooperate with us, we glance ahead to possessing the opportunity of working with companies round the earth for joint development and mutual results.
We always think and practice corresponding to the change of circumstance, and grow up. We aim at the achievement of a richer mind and body and the living for 99.95% Molybdenum /tzm /mola Alloy Sheet /plate /target, Molybdenum /tzm /mola Alloy Sheet, We adopted technique and quality system management, based on “customer orientated, reputation first, mutual benefit, develop with joint efforts”, welcome friends to communicate and cooperate from all over the world.
Chemical composition:
Main and minor components | Min.content(%) | ASTM B386 (361) |
Mo | Balance | balance |
Ti | 0.40-0.55% | 0.40-0.55% |
Zr | 0.06-0.12% | 0.06-0.12% |
Impurities | Max.values (μg/g) | Max.values (μg/g) |
Al | 10 | - |
Cu | 20 | - |
Cr | 20 | - |
Fe | 20 | 100 |
K | 20 | - |
Ni | 10 | 50 |
Si | 20 | 100 |
W | 300 | - |
C | 100-400 | 100-400- |
H | 10 | - |
N | 10 | 20 |
O | 500 | 300 |
Cd | 5 | - |
Hg | 1 | - |
Pb | 5 | - |
Dimensions and tolerances:
Cold rolled sheets | |||
Thickness(mm) | Thickness tolerace(±mm) | Maximal width(mm) | Width tolerace(±mm) |
0.30-0.50 | 0.028 | 300 | 1.0 |
Hot rolled sheets | |||
Thickness(mm) | Thickness tolerace(±mm) | Maximal width(mm) | Width tolerace(±mm) |
0.50-0.60 | 0.06 | 850 | 1.6 |
0.60-1.00 | 0.08 | 850 | 1.6 |
1.00-1.50 | 0.13 | 850 | 2.0 |
1.50-2.00 | 0.15 | 850 | 2.0 |
2.00-3.60 | 0.18 | 850 | 2.0 |
3.60-50.0 | 5% | 1000 | 2.0 |
Length tolerance:
The length tolerance for all dimension is maximal +5/-0 mm.
Flatness: max. 4 % (measuring procedure on the basis of ASTM B 386)
Density: ≥ 10.1 g/cm³
Vickers Hardness: 220-320 HV
Tensile Test:
Thickness (mm) | Tensile StrengthMin. (MPa) | 0.2% Yield strengtMin.(MPa) | ElongationMin.(%) |
0.30-1.00 | 700 | 600 | 5 |
1.00-2.50 | 700 | 600 | 10 |
2.50-5.00 | 700 | 600 | 12 |
5.00-20.00 | 650 | 600 | 10 |
20.00-50.00 | 550 | 470 | 5 |
Appearance: The material will be of uniform quality, free from foreign mater, splits and fractures. Bed sheet (not trimmed) may have small edge cracks.
Surface defedts are assessed in the frame of visual inspection.
Surface condition: pickled.