With this motto in mind, we’ve got develop into amongst one of the most technologically innovative, cost-efficient, and price-competitive manufacturers for 18 Years Factory Tzm Molybdenum Alloy Sheet/plate Round Target, Honest cooperation with you, altogether will develop happy tomorrow!
With this motto in mind, we’ve got develop into amongst one of the most technologically innovative, cost-efficient, and price-competitive manufacturers for Molybdenum Round Target, Molybdenum Target, Tzm Alloy, Our company always concentrate on the development of the international market. We now have a lot of customers in Russia , European countries, the USA, the Middle East countries and Africa countries. We always follow that quality is foundation while service is guarantee to meet all customers.
Chemical composition:
| Main and minor components | Min.content(%) | ASTM B386 (361) |
| Mo | Balance | balance |
| Ti | 0.40-0.55% | 0.40-0.55% |
| Zr | 0.06-0.12% | 0.06-0.12% |
| Impurities | Max.values (μg/g) | Max.values (μg/g) |
| Al | 10 | - |
| Cu | 20 | - |
| Cr | 20 | - |
| Fe | 20 | 100 |
| K | 20 | - |
| Ni | 10 | 50 |
| Si | 20 | 100 |
| W | 300 | - |
| C | 100-400 | 100-400- |
| H | 10 | - |
| N | 10 | 20 |
| O | 500 | 300 |
| Cd | 5 | - |
| Hg | 1 | - |
| Pb | 5 | - |
Dimensions and tolerances:
| Cold rolled sheets | |||
| Thickness(mm) | Thickness tolerace(±mm) | Maximal width(mm) | Width tolerace(±mm) |
| 0.30-0.50 | 0.028 | 300 | 1.0 |
| Hot rolled sheets | |||
| Thickness(mm) | Thickness tolerace(±mm) | Maximal width(mm) | Width tolerace(±mm) |
| 0.50-0.60 | 0.06 | 850 | 1.6 |
| 0.60-1.00 | 0.08 | 850 | 1.6 |
| 1.00-1.50 | 0.13 | 850 | 2.0 |
| 1.50-2.00 | 0.15 | 850 | 2.0 |
| 2.00-3.60 | 0.18 | 850 | 2.0 |
| 3.60-50.0 | 5% | 1000 | 2.0 |
Length tolerance:
The length tolerance for all dimension is maximal +5/-0 mm.
Flatness: max. 4 % (measuring procedure on the basis of ASTM B 386)
Density: ≥ 10.1 g/cm³
Vickers Hardness: 220-320 HV
Tensile Test:
| Thickness (mm) | Tensile StrengthMin. (MPa) | 0.2% Yield strengtMin.(MPa) | ElongationMin.(%) |
| 0.30-1.00 | 700 | 600 | 5 |
| 1.00-2.50 | 700 | 600 | 10 |
| 2.50-5.00 | 700 | 600 | 12 |
| 5.00-20.00 | 650 | 600 | 10 |
| 20.00-50.00 | 550 | 470 | 5 |
Appearance: The material will be of uniform quality, free from foreign mater, splits and fractures. Bed sheet (not trimmed) may have small edge cracks.
Surface defedts are assessed in the frame of visual inspection.
Surface condition: pickled.