High-quality comes 1st; assistance is foremost; business enterprise is cooperation” is our business enterprise philosophy which is constantly observed and pursued by our business for China Supplier Vacuum Furnace Parts Heat Resistant Molybdenum Sheets Moly Ribbons, we could solve our customer problems asap and do the profit for our customer. For those who need superior provider and excellent , pls choose us , thanks !
High-quality comes 1st; assistance is foremost; business enterprise is cooperation” is our business enterprise philosophy which is constantly observed and pursued by our business for Moly Ribbon, Moly Ribbons, Molybdenum Ribbons, Our company offers the full range from pre-sales to after-sales service, from product development to audit the use of maintenance, based on strong technical strength, superior product performance, reasonable prices and perfect service, we are going to continue to develop, to offer the high-quality products and solutions and services, and promote lasting cooperation with our customers, common development and create a better future.
Molybdenum ribbon
Chemical composition:
| Main and minor components | Min.content(%) |
| Mo | Balance |
| Y-Mixoxide | 0.47-0.60% |
| Impurities | Max.values (μg/g) |
| Al | 10 |
| Cu | 20 |
| Cr | 20 |
| Fe | 20 |
| K | 20 |
| Ni | 10 |
| Si | 20 |
| W | 300 |
| C | 30 |
| H | 10 |
| N | 10 |
| Cd | 5 |
| Hg | 1 |
| Pb | 5 |
Dimensions and tolerances:
Ribbon Length/Spool: ≥ 50 m / Spool
Ribbon Thickness: ≥ 50 g / Spool
Ribbon Thickness: 0.015-0.029 mm: +0.002/-0.003mm; 0.030-0.042 mm: +0.003/-0.004mm.
Ribbon Width:
1.5-2.99 mm: ±0.10 mm
3.00-4.99mm: ±0.20 mm
5.0-9.99mm: ±0.30 mm
10.00-20.00mm: ±0.50 mm
Edge Angle α5: ＜13o
Density: ≥10.1g/cm³
Tensile Strength: 750-1000MPa
Surface condition: The surface is dull and free of oxide layers and impurities that are visible to the naked eye. The final annealing is done in continuous furnaces under ruducing hydrogen atmosphere.
Appearance: The edges are free of defects such as kinks, splits ,ripples, twists or burrs.
Roughness: Ra≥0.15μm
Sagitta: Curvature of ribbon≤2mm/200mm.
Edge line: The fringing to the edge line may not exceed 40 μm to the middline.