Our primary objective will be to offer you our shoppers a serious and responsible enterprise relationship, supplying personalized attention to all of them for Hot sale Factory 99.95% Tantalum Sheet,Tantalum Platestantalum Foil, Winning customers’ trust is definitely the gold key to our good results! If you are fascinated in our products, make sure you sense absolutely free to go to our web site or make contact with us.
Our primary objective will be to offer you our shoppers a serious and responsible enterprise relationship, supplying personalized attention to all of them for Polished Tantalum Sheet, Tantalum Sheet, We are your reliable partner in international markets with the best quality products. Our advantages are innovation, flexibility and reliability which have been built during the last twenty years. We focus on providing service for our clients as a key element in strengthening our long-term relationships. Our continual availability of high grade products in combination with our excellent pre-sales and after-sales service ensures strong competitiveness in an increasingly globalized market.
Chemical composition:
Main and minor components | Min.content(%) | ASTM B386 (361) |
Ta | 99.95 | balance |
Impurities | Max.values (μg/g) | Max.values (μg/g) |
Fe | 100 | 100 |
Mo | 100 | 200 |
Nb | 400 | 100 |
Ni | 50 | 100 |
Si | 50 | 50 |
Ti | 50 | 100 |
W | 100 | 500 |
C | 30 | 200 |
H | 15 | 15 |
N | 50 | 100 |
O | 100 | 250 |
Cd | 10 | - |
Hg | 10 | - |
Pb | 10 | - |
Dimensions and toleraces
Thickness (mm) | Thickness tolerance (±mm or % of the thickness) | Width tolerance±mm | |
Width≤320mm | 320mm≤Width≤610mm | ||
0.10 | 0.008 | 0.5 | |
0.10-0.15 | 0.010 | 0.5 | |
0.15-0.30 | 0.010 | 0.5 | |
0.30-0.40 | 0.015 | 0.037 | 1.6 |
0.40-0.60 | 0.020 | 0.050 | 1.6 |
0.60-0.80 | 0.030 | 0.065 | 1.6 |
0.80-1.00 | 0.035 | 0.080 | 1.6 |
1.00-2.50 | 0.040 | 0.100 | 2.0 |
2.50-6.00 | 0.060 | 4% | 2.0 |
6.00-12.70 | 5% | 2.0 |
Length tolerance:The length tolerance for sheet length up to 1000mm maximal +5/-0 mm.
Flatness:max.4% (measuring procedure on the basis of ASTM B708)
Density: ≥16.6g/cm³
Vicker hardness: Thickness≥0.15mm : ≤125HV
Tensile test:
Thickness (mm) | Tensile Strength Min. (MPa) | 0.2% Yield strengt Min.(MPa) | Elongation Min.(%) |
0.10-0.15 | 250 | 180 | 15 |
0.15-1.50 | 230 | 160 | 20 |
1.50-12.70 | 225 | 140 | 30 |
Appearance:The material will be of uniform quality, free from foreign matter, splits and fractures.Bed sheets (not trimmed) may bave small edge cracks.