Adhering to your principle of “quality, assistance, performance and growth”, we’ve obtained trusts and praises from domestic and worldwide client for Low MOQ for Tzm Molybdenum Plate Tzm Sheet For Temperature Alloy Steel, We can present you with one of the most competitive selling prices and good quality, because we have been much far more Qualified! So you should will not hesitate to call us.
Adhering to your principle of “quality, assistance, performance and growth”, we’ve obtained trusts and praises from domestic and worldwide client for Molybdenum Ally Plate Tzm Plate, Tzm Plate Molybdenum Alloy Plate, Tzm Plate Top, Since its foundation , the company keeps living up to the belief of “honest selling , best quality , people-orientation and benefits to customers. ” We are doing everything to supply our customers with best services and best merchandise . We promise that we are going to be responsible all the way to the end once our services begin.
Chemical composition:
| Main and minor components | Min.content(%) | ASTM B386 (361) |
| Mo | Balance | balance |
| Ti | 0.40-0.55% | 0.40-0.55% |
| Zr | 0.06-0.12% | 0.06-0.12% |
| Impurities | Max.values (μg/g) | Max.values (μg/g) |
| Al | 10 | - |
| Cu | 20 | - |
| Cr | 20 | - |
| Fe | 20 | 100 |
| K | 20 | - |
| Ni | 10 | 50 |
| Si | 20 | 100 |
| W | 300 | - |
| C | 100-400 | 100-400- |
| H | 10 | - |
| N | 10 | 20 |
| O | 500 | 300 |
| Cd | 5 | - |
| Hg | 1 | - |
| Pb | 5 | - |
Dimensions and tolerances:
| Cold rolled sheets | |||
| Thickness(mm) | Thickness tolerace(±mm) | Maximal width(mm) | Width tolerace(±mm) |
| 0.30-0.50 | 0.028 | 300 | 1.0 |
| Hot rolled sheets | |||
| Thickness(mm) | Thickness tolerace(±mm) | Maximal width(mm) | Width tolerace(±mm) |
| 0.50-0.60 | 0.06 | 850 | 1.6 |
| 0.60-1.00 | 0.08 | 850 | 1.6 |
| 1.00-1.50 | 0.13 | 850 | 2.0 |
| 1.50-2.00 | 0.15 | 850 | 2.0 |
| 2.00-3.60 | 0.18 | 850 | 2.0 |
| 3.60-50.0 | 5% | 1000 | 2.0 |
Length tolerance:
The length tolerance for all dimension is maximal +5/-0 mm.
Flatness: max. 4 % (measuring procedure on the basis of ASTM B 386)
Density: ≥ 10.1 g/cm³
Vickers Hardness: 220-320 HV
Tensile Test:
| Thickness (mm) | Tensile StrengthMin. (MPa) | 0.2% Yield strengtMin.(MPa) | ElongationMin.(%) |
| 0.30-1.00 | 700 | 600 | 5 |
| 1.00-2.50 | 700 | 600 | 10 |
| 2.50-5.00 | 700 | 600 | 12 |
| 5.00-20.00 | 650 | 600 | 10 |
| 20.00-50.00 | 550 | 470 | 5 |
Appearance: The material will be of uniform quality, free from foreign mater, splits and fractures. Bed sheet (not trimmed) may have small edge cracks.
Surface defedts are assessed in the frame of visual inspection.
Surface condition: pickled.