With dependable high-quality method, fantastic standing and ideal purchaser assistance, the series of products produced by our firm are exported to many countries and regions for Rapid Delivery for Molybdenum Sheet, We feel we will become a leader in developing and producing good quality products and solutions in the two Chinese and international markets. We hope to cooperate with more pals for mutual advantages.
With dependable high-quality method, fantastic standing and ideal purchaser assistance, the series of products produced by our firm are exported to many countries and regions for Molybdenum Sheet, Rolled Molybdenum Sheet, For more than ten years experience in this filed, our company has gained high reputation from home and abroad. So we welcome friends from all over the world to come and contact us, not only for business, but also for friendship.
Molybdenum Sheet
1.Thickness and width tolerances
Cold rolled sheets
Thickness(mm) | Thickness tolerance(±mm) | Max.width(mm) | Width tolerance(±mm) |
0.10 | 0.008 | 305 | 0.5 |
0.10-0.127 | 0.010 | 305 | 0.5 |
0.127-0.15 | 0.010 | 610 | 0.5 |
0.15-0.25 | 0.015 | 800 | 0.5 |
0.25-0.50 | 0.020 | 915 | 1.6 |
0.50-0.80 | 0.028 | 915 | 1.6 |
0.80-1.20 | 0.035 | 915 | 1.6 |
1.20-2.00 | 3% | 915 | 1.6 |
Cold rooled sheets
Thickness(mm) | Thickness tolerance(±mm) | Max.width(mm) | Width tolerance(±mm) |
1.00 | 0.080 | 850 | 2.0 |
1.00-1.50 | 0.130 | 850 | 2.0 |
1.50-2.00 | 0.150 | 850 | 2.0 |
2.00-3.60 | 0.180 | 1200 | 2.0 |
3.60-50.00 | 5% | 1500 | 2.0 |
Length tolerace:
The length tolerace for sheet length up to 2500 mm is max. +5/-0 mm.
The length tolerance of sheet cuts can vary with a total tolerance range not exceeding the above given value. The maximum sheet dimensions depend on the sheet thickness.other dimensions upon request.
Sheet with premium surface condition are available from 0.15 to 1 mm.Sheet with thickness from 0.127 to 0.381 mm can be delivered as coils upon request.(production length max.10500mm)
Flatness:
Max.1% for sheet thickness≥0.3mm
Max.4% for sheet thickness<0.3mm
(measuring proedure on the basis of ASTM B386)
2. Physical and mechanical product properties.
Density: ≥10.2g/cm³
Vickers Hardness:
≤1.0mm: 240-280 HV
1.00-3.60mm: 240-270 HV
306-10.00mm: 220-270 HV
10.00-50.00: >200 HV
Tensile test:
Thickness(mm) | Tensile Srenght Min. (MPa) | 0.2 % Yield strength Min. (MPa) | ElongationMin.(%) |
0.1-0.25 | 700 | 620 | 2.0 |
0.25-0.40 | 680 | 590 | 3.0 |
0.40-0.65 | 680 | 590 | 5.0 |
0.65-1.50 | 680 | 580 | 10.0 |
1.50-2.30 | 640 | 580 | 12.0 |
2.30-5.00 | 640 | 580 | 15.0 |
5.00-10.00 | 640 | 580 | 10.0 |
10.00-13.00 | 590 | 540 | 10.0 |
13.00-25.00 | 500 | 480 | 2.0 |
25.00-50.00 | 500 | 480 | 1.0 |
Surface condition
Appearance: The material will be of uniform quality, free from foreign matter, splits and fractures. bed sheet(not trimmed) may have small edge cracks.
Surface defects are assessed in the frame of visual inspection.
Local surface defects can be removed by frinding within the specified thickness tolerace.
Surface condition: Cold rolled, bright(≤1mm) Ra≤0.20μm
Cold rolled, pickled: Ra≤1.00μm
Cold rolled ground: Ra≤0.60μm
Chemical composition:
Main and minor components | Min.content(%) | ASTM B386 (361) |
Mo | 99.97 | balance |
Impurities | Max.values (μg/g) | Max.values (μg/g) |
Al | 10 | - |
Cu | 20 | - |
Cr | 20 | - |
Fe | 20 | 100 |
K | 20 | - |
Ni | 10 | 50 |
Si | 20 | 100 |
W | 300 | - |
C | 30 | 100 |
H | 10 | 20 |
N | 10 | 70 |
O | 40 | - |
Cd | 5 | - |
Hg | 1 | - |
Pb | 5 | - |