We are committed to providing easy,time-saving and money-saving one-stop purchasing service of consumer for ODM Factory Stock Hot Sale Molybdenum Sheet 0.2mm, How about to start your good enterprise with our corporation? We’re ready, qualified and fulfilled with pride. Let’s start our new organization with new wave.
We are committed to providing easy,time-saving and money-saving one-stop purchasing service of consumer for Hot Sale Molybdenum Sheet 0.2mm, Molybdenum Sheet 0.2mm, Stock Molybdenum Sheet 0.2mm, Satisfaction and good credit to every customer is our priority. We focus on every detail of order processing for customers till they have received safe and sound solutions with good logistics service and economical cost. Depending on this, our merchandise are sold very well in the countries in Africa, the Mid-East and Southeast Asia.
Chemical composition:
Main and minor components | Min.content(%) | ASTM B386 (361) |
Mo | Balance | balance |
Ti | 0.40-0.55% | 0.40-0.55% |
Zr | 0.06-0.12% | 0.06-0.12% |
Impurities | Max.values (μg/g) | Max.values (μg/g) |
Al | 10 | - |
Cu | 20 | - |
Cr | 20 | - |
Fe | 20 | 100 |
K | 20 | - |
Ni | 10 | 50 |
Si | 20 | 100 |
W | 300 | - |
C | 100-400 | 100-400- |
H | 10 | - |
N | 10 | 20 |
O | 500 | 300 |
Cd | 5 | - |
Hg | 1 | - |
Pb | 5 | - |
Dimensions and tolerances:
Cold rolled sheets | |||
Thickness(mm) | Thickness tolerace(±mm) | Maximal width(mm) | Width tolerace(±mm) |
0.30-0.50 | 0.028 | 300 | 1.0 |
Hot rolled sheets | |||
Thickness(mm) | Thickness tolerace(±mm) | Maximal width(mm) | Width tolerace(±mm) |
0.50-0.60 | 0.06 | 850 | 1.6 |
0.60-1.00 | 0.08 | 850 | 1.6 |
1.00-1.50 | 0.13 | 850 | 2.0 |
1.50-2.00 | 0.15 | 850 | 2.0 |
2.00-3.60 | 0.18 | 850 | 2.0 |
3.60-50.0 | 5% | 1000 | 2.0 |
Length tolerance:
The length tolerance for all dimension is maximal +5/-0 mm.
Flatness: max. 4 % (measuring procedure on the basis of ASTM B 386)
Density: ≥ 10.1 g/cm³
Vickers Hardness: 220-320 HV
Tensile Test:
Thickness (mm) | Tensile StrengthMin. (MPa) | 0.2% Yield strengtMin.(MPa) | ElongationMin.(%) |
0.30-1.00 | 700 | 600 | 5 |
1.00-2.50 | 700 | 600 | 10 |
2.50-5.00 | 700 | 600 | 12 |
5.00-20.00 | 650 | 600 | 10 |
20.00-50.00 | 550 | 470 | 5 |
Appearance: The material will be of uniform quality, free from foreign mater, splits and fractures. Bed sheet (not trimmed) may have small edge cracks.
Surface defedts are assessed in the frame of visual inspection.
Surface condition: pickled.