We are committed to delivering easy,time-saving and money-saving one-stop purchasing assistance of consumer for Good quality Wolfram Bars Rods Wl20 Lanthanated Tungsten Electrodes Solid Carbide Bar, In case you are interested in almost any of our objects, make sure you never wait to call us and go ahead and take initial step to construct up a successful business romance.
We are committed to delivering easy,time-saving and money-saving one-stop purchasing assistance of consumer for Solid Carbide Tungsten Bar, Wl20 Lanthanated Tungsten Electrodes, Wolfram Bars Rods, Profession, Devoting are always fundamental to our mission. We’ve got always been in line with serving customers, creating value management objectives and adhering to the sincerity, dedication, persistent management idea.
Chemical composition:
Main and minor components | Min.content(%) | ASTM B760 |
W | 99.95 | balance |
Impurities | Max.values (μg/g) | Max.values (μg/g) |
Al | 15 | - |
Cu | 10 | - |
Cr | 20 | - |
Fe | 30 | 100 |
K | 10 | - |
Ni | 20 | 100 |
Si | 20 | 100 |
Mo | 100 | - |
C | 30 | 100 |
H | 5 | - |
N | 5 | 100 |
O | 20 | 100 |
Cd | 5 | - |
Hg | 1 | - |
Pb | 5 | - |
Diameter and tolerances:
Diameter (mm) | Tolerance | |||
Straightened | Forged | Turned | Ground | |
0.50-0.99 | - | - | ±0.007 | |
1.00-1.99 | - | - | ±0.010 | |
2.00-2.99 | ±2.0 % | - | ±0.015 | |
3.00-15.9 | - | - | ±0.020 | |
16.0-24.9 | - | ±0.30 | ±0.030 | |
25.0-34.9 | - | ±0.40 | ±0.050 | |
35.0-39.9 | - | ±0.40 | ±0.30 | ±0.060 |
40.0-49.9 | - | ±0.40 | ±0.30 | ±0.20 |
50.0-90.0 | - | ±1.00 | ±0.40 | - |
Length and straightness:
Diameter (mm) | Production length (mm) | Stiraightness/Meter (mm) | |
Cleaned | Ground/turned | ||
0.50-10.0 | ≥500 | <2.5 | <2.5 |
10.1-50.0 | ≥300 | <2.0 | <1.5 |
50.1-90.0 | ≥100 | <2.0 | <1.5 |
Length tolerance:
Diameter 0.50-30.0 mm | ||||||
Nominal length (mm) | ≥15 | 15-120 | 120-400 | 400-1000 | 1000-2000 | >2000 |
Length tolerance(mm) | ±0.2 | ±0.3 | ±0.5 | ±2.0 | ±3.0 | ±4.0 |
Diameter >30.0 mm | ||||||
Nominal length (mm) | ≥30 | 30-120 | 120-400 | 400-1000 | 1000-2000 | >2000 |
Length tolerance(mm) | ±0.5 | ±0.8 | ±1.2 | ±4.0 | ±6.0 | ±8.0 |
Density: ≥19.1g/cm³
Nondestructive testing: For diameters>15.00 mm:100% ultrasonic testing. For diameters of 0.50-50.0mm:Eddy curent tests on rods with ground surface.
Diameter(mm) | Hardness (HV 10) |
0.50-2.99 | — |
3.00-9.99 | 420-500 |
10.0-29.9 | 420-480 |
30.0-49.9 | 380-460 |
≥50 | >350 |
Surface condition:
Diameter (mm) | Surface condition |
0.50-90.0 | Chemical cleaned |
≥40.0 | Turned Ra ≤3.2μm |
0.50-30 | Centerless ground Ra≤1.0μm |
≥40.0 | - Centerless ground Ra≤1.2μm |