Special Design for Tzm Moly Rod/bar Molybdenum And Zirconium-titanium Alloy Rods

Well-run tools, expert profits crew, and much better after-sales products and services; We’ve been also a unified major spouse and children, every person stick to the company benefit “unification, dedication, tolerance” for Special Design for Tzm Moly Rod/bar Molybdenum And Zirconium-titanium Alloy Rods, We have a big inventory to fulfill our customer’s requires and needs.
Well-run tools, expert profits crew, and much better after-sales products and services; We’ve been also a unified major spouse and children, every person stick to the company benefit “unification, dedication, tolerance” for Molybdenum Alloy Rod, Molybdenum And Zirconium Titanium Alloy Rod, Tzm Molybdenum Rod, At Present, our merchandise have been exported to more than sixty countries and different regions, such as Southeast Asia, America, Africa, Eastern Europe, Russia, Canada etc. We sincerely hope to establish wide contact with all potential customers both in China and the rest part of the world.
Molybdenum rods Chemical composition:

Main and minor components Min.content(%) ASTM B386 (361)
Mo 99.95 balance
Impurities Max.values (μg/g) Max.values (μg/g)
Al 10 -
Cu 20 -
Cr 20 -
Fe 20 100
K 20 -
Ni 10 50
Si 20 100
W 300 -
C 30 100
H 10 20
N 10 70
O 40 -
Cd 5 -
Hg 1 -
Pb 5 -

Dimensions and tolerances:

Diameter (mm) Diameter tolerance (mm)
Ground
0.50-0.99 ±0.007
1.00-1.99 ±0.010
1.00-2.99 ±0.015
3.00-15.9 ±0.020
16.0-24.9 ±0.030
25.0-34.9 ±0.050
35.0-3939 ±0.060
≥40.0 ±0.20
Cleaned
0.50-4.0 ±2.0%
4.10-10.0 ±1.5%
15.0-50.0 ±0.30
51.0-75.0 ±0.40
75.1-120.0 ±1.00
121.0-165.0 ±1.50
Turned
40.0-49.9 ±0.30
50.0-165.0 ±0.40

Length and straightness:

Diameter (mm) Production length (mm) Stiraightness/Meter (mm)
Cleaned Ground/turned
0.50-0.99 >500 <2.5 <2.5
1.00-9.90 >300 <2.0 <1.5
10.0-165.0 >100 <1.5 <1.0

Length tolerance:

Diameter 0.50-30.0 mm
Nominal length (mm) 6-30 30-120 120-400 400-1000 1000-2000 >2000
Length tolerance(mm) ±0.2 ±0.3 ±0.5 ±0.8 ±1.2 ±2.0
Diameter >30.0 mm
Nominal length (mm) 6-30 30-120 120-400 400-1000 1000-2000 >2000
Length tolerance(mm) ±1.0 ±1.5 ±2.5 ±4.0 ±6.0 ±8.0

Density:
1. 00.50-40.0 mm ≥10.15g/cm³
2. 40.1-80.0 mm ≥10.10g/cm³
3. 80.1-120.0 mm ≥10.00g/cm³
4. 120.1-165.0 mm ≥9.90g/cm³
Nondestructive testing: For diameters>15.00 mm:100% ultrasonic testing; For diameters of 0.50-50.0mm:Eddy curent tests on rods with ground surface.

Diameter(mm) Tensile strength(MPa) 0.2% Yield Strength(MPa) Elongation(%) Hardness(HV 10)
0.50-3.18 ≥585 ≥450 ≥15  
3.18-10.30 ≥515 ≥380 ≥15  
10.32-22.20 ≥620 ≥515 ≥18 230-280
22.20-28.60 ≥585 ≥480 ≥15 225-270
28.60-47.60 ≥515 ≥450 ≥10 215-260
47.60-73.00 ≥480 ≥415 ≥10 210-250
73.00-88.90 ≥450 ≥380 ≥10 205-240
89.00-120.9 ≥450 ≥380 ≥5 200-240
121.0-164.9 ≥450 ≥380 ≥5 180-240
165.0 ≥450 ≥380 ≥- 180-240

Surface condition:

Surface: Cleaned Ground Turned
  φ0.50-165mm φ0.50-50.00mm φ≥40.00mm
Roughness Diameter (mm) Ra (μm) Ground Ra (μm) Turned
  ≤2.50 ≤0.80 -
2.5-50.0 ≤1.00 -
≥40.0 - ≤3.2

  • Special Design for Tzm Moly Rod/bar Molybdenum And Zirconium-titanium Alloy Rods Related Video: