We normally think and practice corresponding towards the change of circumstance, and grow up. We aim at the achievement of a richer mind and body plus the living for Massive Selection for Long Service Life Tzm Plates Tzm Sheets For Industry, Now we have been in operation for more than 10 years. We’re dedicated to top quality items and consumer help. We invite you to go to our corporation for a personalized tour and advanced organization guidance.
We normally think and practice corresponding towards the change of circumstance, and grow up. We aim at the achievement of a richer mind and body plus the living for Hot Sale Molybdenum Alloy Tzm Plate Tzm Sheet Tzm Rod For Industry, Long Service Life Tzm Plate Tzm Sheet For Industry, Tzm Alloy Plates Tzm Alloy Sheets For Industry, Our faith is to be honest first, so we just supply high quality items to our customers. Actually hope that we can be business partners. We believe that we can establish long time business relationship with each other. You can contact us freely for more information and pricelist of our products and solutions !
Chemical composition:
| Main and minor components | Min.content(%) | ASTM B386 (361) |
| Mo | Balance | balance |
| Ti | 0.40-0.55% | 0.40-0.55% |
| Zr | 0.06-0.12% | 0.06-0.12% |
| Impurities | Max.values (μg/g) | Max.values (μg/g) |
| Al | 10 | - |
| Cu | 20 | - |
| Cr | 20 | - |
| Fe | 20 | 100 |
| K | 20 | - |
| Ni | 10 | 50 |
| Si | 20 | 100 |
| W | 300 | - |
| C | 100-400 | 100-400- |
| H | 10 | - |
| N | 10 | 20 |
| O | 500 | 300 |
| Cd | 5 | - |
| Hg | 1 | - |
| Pb | 5 | - |
Dimensions and tolerances:
| Cold rolled sheets | |||
| Thickness(mm) | Thickness tolerace(±mm) | Maximal width(mm) | Width tolerace(±mm) |
| 0.30-0.50 | 0.028 | 300 | 1.0 |
| Hot rolled sheets | |||
| Thickness(mm) | Thickness tolerace(±mm) | Maximal width(mm) | Width tolerace(±mm) |
| 0.50-0.60 | 0.06 | 850 | 1.6 |
| 0.60-1.00 | 0.08 | 850 | 1.6 |
| 1.00-1.50 | 0.13 | 850 | 2.0 |
| 1.50-2.00 | 0.15 | 850 | 2.0 |
| 2.00-3.60 | 0.18 | 850 | 2.0 |
| 3.60-50.0 | 5% | 1000 | 2.0 |
Length tolerance:
The length tolerance for all dimension is maximal +5/-0 mm.
Flatness: max. 4 % (measuring procedure on the basis of ASTM B 386)
Density: ≥ 10.1 g/cm³
Vickers Hardness: 220-320 HV
Tensile Test:
| Thickness (mm) | Tensile StrengthMin. (MPa) | 0.2% Yield strengtMin.(MPa) | ElongationMin.(%) |
| 0.30-1.00 | 700 | 600 | 5 |
| 1.00-2.50 | 700 | 600 | 10 |
| 2.50-5.00 | 700 | 600 | 12 |
| 5.00-20.00 | 650 | 600 | 10 |
| 20.00-50.00 | 550 | 470 | 5 |
Appearance: The material will be of uniform quality, free from foreign mater, splits and fractures. Bed sheet (not trimmed) may have small edge cracks.
Surface defedts are assessed in the frame of visual inspection.
Surface condition: pickled.