We believe that long expression partnership is often a result of top of the range, value added service, prosperous encounter and personal contact for ODM Manufacturer W-1 99.95% Polish Tungsten Plate 2016, Any necessitates from you will be compensated with our greatest consideration!
We believe that long expression partnership is often a result of top of the range, value added service, prosperous encounter and personal contact for Astm B760 Tungsten Plate, Polish Tungsten Plate, Tungsten Plate, The best and original quality for spare parts is a most important factor for transportation. We may stick on supplying original and good quality parts even a little profit earned. God will bless us to do kindness business forever.
Chemical composition:
Main and minor components | Min.content(%) | ASTM B760 |
W | 99.97 | balance |
Impurities | Max.values (μg/g) | Max.values (μg/g) |
Al | 15 | - |
Cu | 10 | - |
Cr | 20 | - |
Fe | 30 | 100 |
K | 10 | - |
Ni | 20 | 100 |
Si | 20 | 100 |
Mo | 300 | - |
C | 30 | 100 |
H | 5 | - |
N | 5 | 100 |
O | 20 | 100 |
Cd | 5 | - |
Hg | 1 | - |
Pb | 5 | - |
Dimensions and tolerances:
Cold rolled sheets
Thickness(mm) | Thickness tolerance(±mm) | ||
Width≤200mm | Max.width 510mm | Width tolerance(±mm) | |
0.025 | 0.003 | ||
0.025-0.03 | 0.004 | 0.5 | |
0.03-0.04 | 0.005 | 0.5 | |
0.04-0.05 | 0.006 | 0.5 | |
0.05-0.06 | 0.008 | 0.5 | |
0.06-0.08 | 0.010 | 0.5 | |
0.08-0.10 | 0.015 | 0.5 | |
0.10-0.15 | 0.025 | 0.045 | 0.5 |
0.15-0.30 | 0.035 | 0.060 | 1.0 |
0.30-0.40 | 0.05 | 0.085 | 1.6 |
0.40-0.50 | 0.06 | 0.110 | 1.6 |
Hot rooled sheets
Thickness(mm) | Thickness tolerance(±mm) | ||
Width≤510mm | Max.width 1200(mm) | Width tolerance(±mm) | |
0.05-0.60 | 0.110 | 1.6 | |
0.60-0.80 | 0.140 | 2.0 | |
0.08-1.00 | 0.200 | 2.0 | |
1.00-2.00 | 0.250 | 2.0 | |
2.00-8.00 | 0.300 | 2.0 | |
8.0-20.00 | 5% | 5% | 2.0 |
Length tolerance: the length tolerance for all dimensions is maximal +5/-0 mm.
Flatness: max. 4% (measuring procedure on the basis of ASTM B760)
Density: thickness<10.00mm density>19.2g/cm³
thicknes(10.00-20.00mm)density>19.1g/cm³
Vickers hardness:
≤0.10 mm ≥550 HV
0.10-0.05 mm ≥500 HV
0.50-1.50mm ≥470 HV
1.50-10.00mm ≥450 HV
10.00-20.00mm ≥420 HV
Appearance: The material will be of uniform quality, free from foreign matter, splits and fractures.
Bed sheet (not trimmed) may have small edge cracks.
Surface quality:
Cold rolled ≤ 0.30mm bright
Cold rolled 0.3-0.5 mm pickled
Hot rolled ≥0.50 mm pickled