Sticking for the principle of “Super Quality, Satisfactory service” ,We have been striving for being a superb small business partner of you for Chinese wholesale Stylish Square Tzm Molybdenum Rod, We have been sincerely wanting forward to cooperate with consumers all over the earth. We feel we can easily satisfy with you. We also warmly welcome buyers to visit our manufacturing unit and purchase our products and solutions.
Sticking for the principle of “Super Quality, Satisfactory service” ,We have been striving for being a superb small business partner of you for Square Tzm Molybdenum Rod, Stylish Square Tzm Molybdenum Rod, We have top engineers in these industries and an efficient team in the research. What is more, we have now our own archives mouths and markets in China at low cost. Therefore, we can meet different inquiries from different clients. You should find our website to check more information from our products and solutions.
TZM rods
Chemical composition:
Main and minor components | Min.content(%) | ASTM B386 (361) |
Mo | blance | balance |
Ti | 0.40-0.55% | 0.40-0.55% |
Zr | 0.06-0.12% | 0.06-0.12% |
Impurities | Max.values (μg/g) | Max.values (μg/g) |
Al | 10 | - |
Cu | 20 | - |
Cr | 20 | - |
Fe | 20 | 100 |
K | 20 | - |
Ni | 10 | 50 |
Si | 20 | 50 |
W | 300 | - |
C | 100-400 | 100-400 |
H | 10 | - |
N | 10 | 20 |
O | 500 | 300 |
Cd | 5 | - |
Hg | 1 | - |
Pb | 5 | - |
Dimensions and tolerances:
Diameter (mm) | Diameter tolerance (mm) |
Ground | |
0.50-0.99 | ±0.007 |
1.00-1.99 | ±0.010 |
1.00-2.99 | ±0.015 |
3.00-15.9 | ±0.020 |
16.0-24.9 | ±0.030 |
25.0-34.9 | ±0.050 |
35.0-3939 | ±0.060 |
≥40.0 | ±0.20 |
Cleaned | |
0.50-4.0 | ±2.0% |
4.10-10.0 | ±1.5% |
15.0-50.0 | ±0.30 |
51.0-75.0 | ±0.40 |
75.1-120.0 | ±1.00 |
121.0-165.0 | ±1.50 |
Turned | |
40.0-49.9 | ±0.30 |
50.0-165.0 | ±0.40 |
Length and straightness:
Diameter (mm) | Production length (mm) | Stiraightness/Meter (mm) | |
Cleaned | Ground/turned | ||
0.50-0.99 | >500 | <2.5 | <2.5 |
1.00-9.90 | >300 | <2.0 | <1.5 |
10.0-165.0 | >100 | <1.5 | <1.0 |
Length tolerance:
Diameter 0.50-30.0 mm | ||||||
Nominal length (mm) | 6-30 | 30-120 | 120-400 | 400-1000 | 1000-2000 | >2000 |
Length tolerance(mm) | ±0.2 | ±0.3 | ±0.5 | ±0.8 | ±1.2 | ±2.0 |
Diameter >30.0 mm | ||||||
Nominal length (mm) | 6-30 | 30-120 | 120-400 | 400-1000 | 1000-2000 | >2000 |
Length tolerance(mm) | ±1.0 | ±1.5 | ±2.5 | ±4.0 | ±6.0 | ±8.0 |
Density:
1. 0.50-40.0 mm ≥10.15g/cm³
2. 40.1-80.0 mm ≥10.10g/cm³
3. 80.1-120.0 mm ≥10.00g/cm³
4. 120.1-165.0 mm ≥9.90g/cm³
Nondestructive testing: For diameters>15.00 mm:100% ultrasonic testing; For diameters of 0.50-50.0mm:Eddy curent tests on rods with ground.
Diameter(mm) | Tensile strength(MPa) | 0.2% Yield Strength(MPa) | Elongation(%) | Hardness(HV 10) |
0.50-4.76 | - | - | - | - |
4.76-22.20 | ≥790 | ≥690 | ≥18 | |
22.20-28.60 | ≥760 | ≥655 | ≥15 | 260-320 |
28.60-47.60 | ≥690 | ≥585 | ≥10 | 250-310 |
47.60-73.00 | ≥620 | ≥550 | ≥10 | 245-300 |
73.00-120.9 | ≥585 | ≥515 | ≥5 | 240-290 |
121.0-165 | ≥585 | ≥515 | ≥5 | 220-280 |
Surface condition:
Surface: | Cleaned | Ground | Turned |
φ0.50-165mm | φ0.50-50.00mm | φ≥40.00mm | |
Roughness | Diameter (mm) | Ra (μm) Ground | Ra (μm) Turned |
≤2.50 | ≤0.80 | - | |
2.5-50.0 | ≤1.00 | - | |
≥40.0 | - | ≤3.2 |