Our advancement depends over the superior machines, exceptional talents and continually strengthened technology forces for Bottom price 99.95%min Stock Pure Molybdenum Plate Mo Sheet, To significantly increase our service quality, our corporation imports a large number of overseas advanced devices. Welcome clientele from home and overseas to connect with and inquire!
Our advancement depends over the superior machines, exceptional talents and continually strengthened technology forces for 99.95%min Stock Pure Mo Sheet, 99.95%min Stock Pure Molybdenum Plate, Pure Molybdenum Plate Mo Sheet, In the increasingly competitive market, With sincere service high quality products and well-deserved reputation, we always supply customers support on solutions and techniques to achieve long-term cooperation. Living by quality, development by credit is our eternal pursuit, We firmly believe that after your visit we will become long-term partners.
Chemical composition:
Main and minor components | Min.content(%) | ASTM B386 (361) |
Mo | Balance | balance |
Ti | 0.40-0.55% | 0.40-0.55% |
Zr | 0.06-0.12% | 0.06-0.12% |
Impurities | Max.values (μg/g) | Max.values (μg/g) |
Al | 10 | - |
Cu | 20 | - |
Cr | 20 | - |
Fe | 20 | 100 |
K | 20 | - |
Ni | 10 | 50 |
Si | 20 | 100 |
W | 300 | - |
C | 100-400 | 100-400- |
H | 10 | - |
N | 10 | 20 |
O | 500 | 300 |
Cd | 5 | - |
Hg | 1 | - |
Pb | 5 | - |
Dimensions and tolerances:
Cold rolled sheets | |||
Thickness(mm) | Thickness tolerace(±mm) | Maximal width(mm) | Width tolerace(±mm) |
0.30-0.50 | 0.028 | 300 | 1.0 |
Hot rolled sheets | |||
Thickness(mm) | Thickness tolerace(±mm) | Maximal width(mm) | Width tolerace(±mm) |
0.50-0.60 | 0.06 | 850 | 1.6 |
0.60-1.00 | 0.08 | 850 | 1.6 |
1.00-1.50 | 0.13 | 850 | 2.0 |
1.50-2.00 | 0.15 | 850 | 2.0 |
2.00-3.60 | 0.18 | 850 | 2.0 |
3.60-50.0 | 5% | 1000 | 2.0 |
Length tolerance:
The length tolerance for all dimension is maximal +5/-0 mm.
Flatness: max. 4 % (measuring procedure on the basis of ASTM B 386)
Density: ≥ 10.1 g/cm³
Vickers Hardness: 220-320 HV
Tensile Test:
Thickness (mm) | Tensile StrengthMin. (MPa) | 0.2% Yield strengtMin.(MPa) | ElongationMin.(%) |
0.30-1.00 | 700 | 600 | 5 |
1.00-2.50 | 700 | 600 | 10 |
2.50-5.00 | 700 | 600 | 12 |
5.00-20.00 | 650 | 600 | 10 |
20.00-50.00 | 550 | 470 | 5 |
Appearance: The material will be of uniform quality, free from foreign mater, splits and fractures. Bed sheet (not trimmed) may have small edge cracks.
Surface defedts are assessed in the frame of visual inspection.
Surface condition: pickled.